Secure I AM Forums
Sign up Calendar Latest Topics Chat
 
 
 


Note: This topic is locked. No new replies will be accepted.


Reply
  Author   Comment  
Secure I AM

Administrator
Registered:
Posts: 280
Reply with quote  #1 
Requires Entering of User Code, default user code is 5678 on Premier & Premier Elite Panels.

Full Arm.

Press 5678 (Do you want to arm the system is displayed) PressYes

Part Arm.

Press 5678 (Do you want to arm the system is displayed) Press Part (Do you want to Evening Arm:- is displayed)
Select the Part arm you require then Press
Yes.


 Note: at default the three part sets are labelled:  Evening Arm (Part Arm 1),
                                                                         Bedtime 1 Arm (Part Arm 2),
                                                                         Bedtime 2 Arm (Part Arm 3).
          
Depending on how the system is programed by your alarm engineer will depend on how the system arms.  You can have silent Part Arm, Instant part Arm programed.

On the Premier 24 (Pre Elite panels only) each part arm can have a separate arming mode.
The Premier 640 arming options will covered separately at a later date as these vary between panel versions.

The Premier Elite 640 works as the same process as the other Elite panels but has 64 areas.

Selecting an Area to Arm.

Press 5678 (Do you want to arm the system is displayed)
Press Area, (Select Areas >**..< will be displayed, select Area be press numbers 1 through to 8)Press Yes

Note:
* indicates an Area that is available to that User, . indicates Area that is not available to that user. The four spaces **.. indicate we have a 4 Area system (Premier 48), Areas A and B are available  Areas C and D are not. Areas C and D may already be armed or not assigned to that user.

Users can be setup or edited by the Alarm Engineer or by the Master User.


Part Arm a specific Area.

Press 5678 (Do you want to arm the system is displayed)
Press Part (Do you want to Evening Arm:- is displayed)
Evening Arm
(Part Arm 1),
Bedtime 1 Arm (Part Arm 2),
Bedtime 2 Arm (Part Arm 3).
Select the Part arm you require then Press
Area,
Select the Area you wish to part arm, then Press Yes.

If you selected Part Arm 2 and Area B, you will part set 2 area B only, for a short period the lcd display will show the part arm and the area that is part armed.

          

Warning: Use of Auto Yes, this can be used so that when arming the system, you type in your code and it arms the system without you needing to press Yes.

If this feature has been enabled for a User, be aware that because it automatically says yes to whatever is displayed when you log in, it can cause problems if you want to do anything other than arm and disarm the system, Engineers & Master Users should in our opinion never have this enabled.

If Area Arm Suites have been programed by your alarm installer, you will need to press Part twice then select which part arm you require

__________________
http://www.secureiam.co.uk
0
Previous Topic | Next Topic
Print
Reply

Quick Navigation:


Create your own forum with Website Toolbox!